Clik here to view.
How to remotely access a pCP7 local USB disk mount from another pCP7 device
I thought I understood this (and even had it working under previous versions of pCP), but I've been struggling for a couple of hours now so I figured it was time to ask for advice. On my LMS server...
View ArticleNetwork dropout with pCP 7.0.0
I've posted previously in the pCP 7.0.0 announce thread (#374 and #375, but I guess my issue got drowned out in the traffic. I've recently updated in-situ from pCP 6.Since then, my pCP has lost network...
View ArticlePcp Update to LMS 8.1.2
I am confused about how LMS updates happen with pcp. I am on pcp 6.1 (I will be updating to 7.0) and I have previously used the lms-update script to select the stable branch of LMS with nightly...
View ArticleUsing the RemotePi board with pCP
The RemotePi boards offers a shutdown button and infrared for connecting a remote. The shutdown button is also operated by the remote so you can turn the Pi on either with the button or using the...
View Article5" Touchscreen display that works with Jivelite right out of the box.
https://www.amazon.com/gp/product/B0...?ie=UTF8&psc=1 OSOYOO IPS 5 DSI Portable Touch Screen Display Monitor for Raspberry Pi 4 3 2 Model A B Worked right out of the box, touch screen and all....
View ArticleDocker Images - Tagging?
> 1) Would it make sense to keep the last âstableâ of each main version around? Yes. I plan to always have a version number tag, too. This won't go away, once builds for that version aren't...
View ArticleRaspberry Pi Pico
https://www.raspberrypi.org/blog/ras...o-now-on-sale/ piCoCorePlayer?
View ArticleLMS 8.1.x mit Perl 5.14.2
> I have successfully upgraded to an LMS 8.0.0 on an arm system and Perl > 5.14.2. All newer versions fail when starting the LMS because apparently > the Perl version is not supported. Where...
View ArticleLms and Raspberry (raspbian): dedicate 1 CPU?
Hi i have a Raspberry 4 with raspbian that i use for my domotic house. I installed LMS 8.1 and works fine. A question: could be a good idea to dedicate One CPU to LMS or prirotize It with some trick?...
View ArticleClik here to view.
Kernel panic
Hi all - I have a new Pi 4B / HifiBerry Amp2 setup. It seems to run for a couple days and then POOF disappears from the network. I set the whole thing back up a second time from scratch, but it's just...
View ArticlepCP as LMS Server (only) - as close to plug and play as possible?
I need some thought, help, advise on preparing a LMS server on pCP to ship to a friend. The goal is to make it as close to plug and play as possible. The back story - I have a seasonal cabin about 250...
View ArticlePi4b + piCoreplayer 7.0.0 + 3.5" Screen ADS7846 Successfully setup but not...
Hi all. January is almost over and I wish you've enjoyed this month as it's usually slightly quieter. I've setup the screen to work on the bottom level ------ it's showing pCp's bootup lines now. In...
View Articlepcp7 usb dac not playing hi res 192khz, downsample?
Dear Forum, i am running lms 8.1 on pcp 7 64 bit raspberry 3. i have a sound blaster play 3 usb dac connected and now it runs fine up to 96 kHz. i have a few 192khz rips, and these are not playing. is...
View ArticleGetting HDMI CEC to work on pCP 7.0
I thought I would start a new thread on this to document progress. The pCP kernel has HDMI CEC enabled. So next step is to get it to work so that a TV remote control can be used to control JiveLite...
View ArticlePCP and J River
Among all the audio software I've been mucking around with the last little bit of time, I also use J River Media Center. I have set up a nice RPi-4B/PCP/LMS/SL set up. In J River, I noticed PCP has...
View ArticleUPnP/DLNA vs UPnP/DLNA in LMS?
In LMS Plugins, what's the difference between UPnP/DLNA Media Interface by Andy Grundman and UPnP/DLNA bridge by Phillipe? I read the documentation provided by Phillipe. So, both provide UPnP/DLNA...
View Article2.8" touch display on picore
I am trying to install drivers for this display: https://raspberrypiwiki.com/index.ph...en_for_Pi_zero on picoreplayer 7.0.0, Pi Zero W, but cannot get the git command to run. Is there another way to...
View ArticleLost sound after upgrading to pCP 7
Hi there Today I in-situ updated pCP from 6.1.0 to 7.0.0. Problem: My sound disappeared. piCorePlayer | piCorePlayer v7.0.0 | www v00011 | linux 5.4.83-pcpCore-v7 | piCore v12.0pCP | Squeezelite...
View ArticleClik here to view.
Problem of rights when moving LMS Pref/Cache to NFS drive on Synology
Hi To save my SD, I tried to move LMS Cache/Preferences folders from the SD to a Syno drive shared with NFS I applied the same approach as for my music, also mounted via a NFS share for LMS However, I...
View ArticleClik here to view.
Mount Network Share in PiCorePlayer LMS
Hi, I'd like to mount a network share on my NAS. However, the input fields in the PCP web interface are greyed out, I'm not able to enter the IP address of my NAS. Any idea? Cheers, Yves Attached...
View Article
